C-Band 40dBm EDFA PM Fiber Optical Amplifier

 The one in the video is a benchtop 40dBm erbium-doped fiber amplifier. The input and output fibers of the PM amplifier are polarization maintaining fiber PM1550 and the connector keys are aligned the slow axis.

This EDFA is designed to amplify optical signals up to 10W average power for high power applications at 1550nm wavelength range. The operating current or output power can be adjusted by pressing the button. You can choose the software control function and use the RS232 interface to connect to the software.

The two working modes of ACC and APC can be switched. In APC mode, the output power can be adjusted. In ACC mode, the operating current can be adjusted.


The high-power polarization-maintaining erbium-doped fiber amplifier is based on the polarization-maintaining double-clad erbium-doped fiber amplification technology. It adopts a unique fiber packaging process and a reliable high-power laser protection design to achieve high-power laser polarization-maintaining output in the wavelength range of 1540~1565nm. It has the advantages of high power, high extinction ratio and low noise, and can be used for fiber optic communication, laser radar, etc.

The test report of this EDFA.







Comments

Popular posts from this blog

0.1 dollar get a 200mw green laser pointer -- what! is it true?

C-Band EDFA 25dB Gain Pre-Amplifier

Fiber-laser in-band pumping enables novel 2 µm high-power short-pulse laser