NakuLaser Blog

 This is a 543nm solid state laser system . The output power is 100mW, it can be adjusted by the rotary button on the power supply. There are 3 working modes for the laser to choose from. Select the working mode CW/TTL/Analog by the sliding button on the back of the power supply.  The red button is the power switch. The key is a laser switch. The middle LCD shows the current working current. The rotary button on the right is to adjust the current size.   This laser coupled a 1000μm, 3 meters in length, SMA905 interface fiber, and its can be customized. The effect of laser output from the fiber port:

 It's a 543nm 10mW DPSS laser system . The back of the laser head is equipped with a cooling fan. There are 3 working modes available on the back of the laser power supply, CW, TTL and Analog. The red button is pressed to be ON, and the power is turned on. When the safety key is turned ON, laser output starts at this time. Rotate the'Adjustor' button and turn it clockwise to increase the current, thereby increasing the laser output power. Let's check it now. The center wavelength is 542.8nm. And its spot is perfectly round, it is TEM00 mode.