C-Band 10W SM Erbium-doped Fiber Amplifier

 It's a 40dBm erbium-doped fiber amplifier. The working status of this EDFA is controlled by buttons. This is a very high power fiber amplifier with 3 cooling fans inside. This EDFA is configured with single-mode fiber. The left and right buttons switch between ACC/APC two control modes. ACC automatic current control, the current setting range is 0~9600mA. APC automatic power control, the power setting range is 23~33dBm.The up and down buttons are to adjust the current/power. The middle button is the confirmation key. Let's check it now.


High-power single-mode erbium-doped fiber amplifier (EYDFA-HP) is based on the principle of laser amplification of optical signals in erbium-doped fiber, using unique multi-stage optical amplification design and reliable high-power laser heat dissipation technology to achieve the wavelength range of 1540~1565nm Internal high-power laser output. It has the advantages of high power and low noise, and can be used for optical fiber communication, laser radar, etc.








Comments

Popular posts from this blog

0.1 dollar get a 200mw green laser pointer -- what! is it true?

C-Band EDFA 25dB Gain Pre-Amplifier

Advantages and Disadvantages of Fiber Lasers