Newest Erbium-doped Fiber Amplifier EDFA Products list

-
Newest EDFA Products list.
Include C-band / L-band , Pre – Amplifier PA, Booster – Amplifier BA EDFA.

EDFA Type
EDFA Description
Product Link
EDFA-C-PA-Single Channel
EDFA: Erbium-doped Fiber Amplifier
Wavelength range: 1530~1565nm C-band
PA: Pre-Amplifier, small signal amplifier
Single Channel: Recommended for single wavelength amplification. But when the multi-wavelength light source is amplified, the gain flatness is too large.
Gain flatness: 3dB
EDFA-C-BA-Single Channel
EDFA: Erbium-doped Fiber Amplifier
Wavelength range: 1530~1565nm  C-band
BA: Booster Amplifier, power amplifier
Single Channel: Recommended for single wavelength amplification, high output power. But when the multi-wavelength light source is amplified, the gain flatness is too large.
Gain flatness: 3dB
EDFA-C-PA-Flat Gain
EDFA: Erbium-doped Fiber Amplifier
Wavelength range: 1530~1565nm  C-band
PA: Pre-Amplifier, small signal amplifier
Flat Gain: Recommended for multi-wavelength light source amplification, good gain flatness.
Gain flatness: 1.5(Type)  0.8(Min)
EDFA-C-BA-Flat Gain
EDFA: Erbium-doped Fiber Amplifier
Wavelength range: 1530~1565nm  C-band
BA: Booster Amplifier, power amplifier
Flat Gain: Recommended for multi-wavelength light source amplification, good gain flatness.
Gain flatness: 1.5dB(Type)  0.8dB(Min)
EDFA-C-PA-PM
EDFA: Erbium-doped Fiber Amplifier
Wavelength range: 1530~1565nm  C-band
PA: Pre-Amplifier, small signal amplifier
PM: PM1550 fiber,Polarization-Maintaining EDFA
EDFA-C-BA-PM
EDFA: Erbium-doped Fiber Amplifier
Wavelength range: 1530~1565nm  C-band
BA: Booster Amplifier, power amplifier
PM: PM1550 fiber,Polarization-Maintaining EDFA
EDFA-L-BA
EDFA: Erbium-doped Fiber Amplifier
Wavelength range: 1570~1603  L-band
BA: Booster Amplifier, power amplifier
EDFA-High Power
EDFA: Erbium-doped Fiber Amplifier
Wavelength range: 1540~1565 nm
Output power: 27/30/33/35/37/40 dBm
EDFA-In-Line Amplifier
EDFA: Erbium-doped Fiber Amplifier
Wavelength range: 1530~1565nm  C-band
In-Line: Single Channel Erbium-doped Fiber In-Line Amplifier

Comments

Post a Comment

Popular posts from this blog

The World's Largest Laser Consumer Market

-
Image
The largest consumer market for lasers in the world - China China's laser industry market started late,However, with the rapid development of China's equipment manufacturing industry, China's laser industry has achieved rapid development in recent years. China is an active market for manufacturing and industrial laser equipment. Affected by factors such as macroeconomic development, upgrading of manufacturing industries, and support of national policies, China's industrial laser industry has become one of the industries that are highly concerned, and the market is developing rapidly. In 2015, China replaced Europe and became the largest consumer market for lasers for the first time. In 2018 The market grew to around US$2.8 billion, accounting for 29% of the global market.
Read more

Femtosecond lasers extend glass cleaving to mixed materials

-
Filamentation cutting is a relatively new process that uses ultrashort-pulse (USP) lasers to cut a wide range of glass substrates, from soft borosilicates to chemically hardened glass used in smartphone displays. Among the advantages of filamentation cutting are the ability to produce curved shapes and cut-outs, cutting speeds up to 2000 mm/s, and superior stress-free edge quality, which eliminates the need for post-processing. The high peak intensity created by a focused USP laser produces self-focusing of the beam because of the nonlinear optical Kerr effect, further increasing power density until, at a certain threshold, a low density plasma is created in the material. This plasma lowers the material refractive index in the center of the beam path and causes the beam to defocus. If the beam focusing optics are properly configured, this focusing/defocusing effect can be balanced to periodically repeat and form a stable filament, which extends over several millimeters in depth throu...
Read more

The Difference Between Fiber Laser and CO2 Laser

-
Image
The main difference between the fiber laser  and the CO2 laser is that the working materials of the two are different. The working material of the fiber laser is optical fiber, and the working material of the CO2 laser is CO2, which belongs to the gas laser. In addition, the power of the two is relatively large. The difference is that fiber lasers are currently used from a few hundred watts to thousands of watts, while CO2 lasers typically   have a power range of 80W to 600W. The photoelectric conversion efficiency of fiber lasers is higher than that of CO2 lasers. Fiber lasers are superior to CO2 lasers in terms of cutting quality and speed. Fiber lasers are lower than CO2 lasers in terms of use and maintenance costs. Higher than CO2 lasers ; in addition, both fiber lasers and CO2 lasers require a chiller to cool and cool them.
Read more