940nm Laser Diode Module Dot

-
940nm 100mW Infrared Laser Module Dot APC Driver Circuit
[Specifications]
Wavelength: 940nm
Output Power: 100mW
Laser Safety: Class IIIB
Circuit Mode: CW
Driver Circuit: APC
Lens: Glass collimator
Housing Material: Aluminum
Line Width: <5*10mm at 10m
Divergence Angle: <0.7mard
Operating Voltage: 2.8~3.5V
Operating Current: <200mA
Operating Temperature: -20℃~+50℃
Storage Temperature: -40℃~+85℃
Mean Time to Failure: >8000H
Size: 10*35mm(Diameter*Length)

940nm laser module

Comments

Post a Comment

Popular posts from this blog

0.1 dollar get a 200mw green laser pointer -- what! is it true?

-
Image
Q: 0.1 dollar get a 200mw green laser pointer -- what! is it true? A: Yes, it's true. 7 kinds of $0.1 laser pointers Product Link: https://www.lucklaser.com/index.php?main_page=product_info&cPath=31&products_id=192 Q: How to buy? A: As long as your order is over $60, you can buy it with $0.1. Q: It's so cheap. Is the power of the laser pen high? A: 7 kinds of $0.1 laser pointers's power in not high.If you want to buy a high power laser pointer, you can consider Lucklaser's 3000mW blue laser pointer. 3000mW blue laser pointer -- 61%OFF Product Link: https://www.lucklaser.com/index.php?main_page=product_info&cPath=19&products_id=190 Q: Christmas is coming, what gift to friends? A: A high power laser pointer . Q: What can I do with laser pointer? A: Wow! The use of the laser pointer is great. It can be used as a laser pointer for classroom teaching, for outdoor adventure, indicating the remote target and send a distress signal,can be ...
Read more

Fiber-laser in-band pumping enables novel 2 µm high-power short-pulse laser

-
Image
Highly efficient high-power short-pulse lasers in the 2 µm wavelength range based on thulium (Tm3+)-doped materials have a variety of applications that include materials processing (such as polymer-to-metal joining), lidar, mid-infrared optical parametric oscillators (OPOs) that produce wavelengths up to 12 μm, and mid-IR supercontinuum generation. They also would enable direct coherent soft x-ray generation via high-order harmonic generation (HHG). For these applications, a light source with much higher conversion efficiency, average power, pulse energy, and shorter pulse duration is desirable. Now, Masaki Tokurakawa and colleagues at the Institute for Laser Science, University of Electro-Communications (UEC; Tokyo, Japan) have developed novel 2 µm high-power short-pulse lasers based on new technique of fiber-laser in-band pumping at 1611 nm and Kerr-lens mode locking with a new Tm-doped gain medium provided from the University of Hamburg by researcher Christian Kränkel.1, 2 ...
Read more

Advantages and Disadvantages of Fiber Lasers

-
Image
Fiber laser  advantages : (1) The advantages of miniaturization and intensification brought about by the low manufacturing cost of glass optical fiber, mature technology and the availability of optical fiber; (2) The glass fiber does not require strict phase matching of the incident pump light like a crystal, which is due to the non-uniform broadening caused by the splitting of the glass matrix Stark, resulting in a wide absorption band; (3) The glass material has a very low volume-to-area ratio, and the heat dissipation is fast and the loss is low, so the up-conversion efficiency is high and the laser threshold is low; (4) The output laser has many wavelengths: this is because the rare earth ion energy level is very rich and there are many kinds of rare earth ions; (5) Tunability: Since the rare earth ion energy level is wide and the fluorescence spectrum of the glass fiber is wide. (6) Since there is no optical lens in the cavity of the fiber laser, it has th...
Read more