Hot sales! LuckLaser's Blue/Green/Red Laser Pointers

-
Hot sales! 405/450/488/505/520/638nm Blue/Green/Red laser pointer DS6
[Specifications]
Wavelength: 405/450/488/505/520/638nm
Output Power: 60-700mW
Security Level: Class 3B, Class Ⅳ
Size：135.2*32mm
Shell Material: Aviation aluminum
Color:Fine sand Dumb black
Switch mode: self lock, turn off or light touch shift
Circuit Control: constant current drive
Circuit Efficiency: Step-up conversion efficiency of 93%
Laser Modes: Always bright and dazzling light
Spot Form: Dot
Laser Beam Style: Continuous linear
Spot Size: about at 5m<φ15-18mm
Focusing Method: Focusing (Rotate the threaded front cover)
Diving Level: 5m diving
Battery Type: 1*18650 rechargeable battery (Not included)
Battery Direction: the positive direction of the light, the negative tail hair switch
Operating Current: Depending on the power and wavelength, max 3.7V @ 1A
Battery direction: negative direction to light direction, positive to tail switch.
Operating Voltage: DC = 3.7V
Starting Voltage: DC = 2.5V
Operating Temperature: -10 ℃ ~ +60 ℃
Storage Temperature: -10 ℃ ~ +40 ℃
Net weight: 138g
Hot sales! 405/450/488/505/520/638nm Blue/Green/Red laser pointer DS6

Hot sales! 405/450/488/505/520/638nm Blue/Green/Red laser pointer DS6

Hot sales! 405/450/488/505/520/638nm Blue/Green/Red laser pointer DS6

Hot sales! 405/450/488/505/520/638nm Blue/Green/Red laser pointer DS6

Hot sales! 405/450/488/505/520/638nm Blue/Green/Red laser pointer DS6

Hot sales! 405/450/488/505/520/638nm Blue/Green/Red laser pointer DS6

Comments

Post a Comment

Popular posts from this blog

The Difference Between Fiber Laser and CO2 Laser

-
Image
The main difference between the fiber laser  and the CO2 laser is that the working materials of the two are different. The working material of the fiber laser is optical fiber, and the working material of the CO2 laser is CO2, which belongs to the gas laser. In addition, the power of the two is relatively large. The difference is that fiber lasers are currently used from a few hundred watts to thousands of watts, while CO2 lasers typically   have a power range of 80W to 600W. The photoelectric conversion efficiency of fiber lasers is higher than that of CO2 lasers. Fiber lasers are superior to CO2 lasers in terms of cutting quality and speed. Fiber lasers are lower than CO2 lasers in terms of use and maintenance costs. Higher than CO2 lasers ; in addition, both fiber lasers and CO2 lasers require a chiller to cool and cool them.
Read more

The World's Largest Laser Consumer Market

-
Image
The largest consumer market for lasers in the world - China China's laser industry market started late,However, with the rapid development of China's equipment manufacturing industry, China's laser industry has achieved rapid development in recent years. China is an active market for manufacturing and industrial laser equipment. Affected by factors such as macroeconomic development, upgrading of manufacturing industries, and support of national policies, China's industrial laser industry has become one of the industries that are highly concerned, and the market is developing rapidly. In 2015, China replaced Europe and became the largest consumer market for lasers for the first time. In 2018 The market grew to around US$2.8 billion, accounting for 29% of the global market.
Read more

Femtosecond lasers extend glass cleaving to mixed materials

-
Filamentation cutting is a relatively new process that uses ultrashort-pulse (USP) lasers to cut a wide range of glass substrates, from soft borosilicates to chemically hardened glass used in smartphone displays. Among the advantages of filamentation cutting are the ability to produce curved shapes and cut-outs, cutting speeds up to 2000 mm/s, and superior stress-free edge quality, which eliminates the need for post-processing. The high peak intensity created by a focused USP laser produces self-focusing of the beam because of the nonlinear optical Kerr effect, further increasing power density until, at a certain threshold, a low density plasma is created in the material. This plasma lowers the material refractive index in the center of the beam path and causes the beam to defocus. If the beam focusing optics are properly configured, this focusing/defocusing effect can be balanced to periodically repeat and form a stable filament, which extends over several millimeters in depth throu...
Read more