NakuLaser Blog

 This is a 1550nm fiber coupled laser. This one uses the latest touch screen technology. It is coupled to the polarization-maintaining fiber output. The output can be adjusted on the screen. Its setting range is 25dBm to 35dBm. It can also directly set the value you want. Use the up and down arrow buttons on the screen to adjust the power directly. You can also click "PowerSet" and enter your desired power value. Click the unit field to switch between dBm and W. 1550nm is infrared laser, which is invisible to the naked eye. We need to observe the light spot on the infrared detection card. This laser adopts DFB type laser chip, and cooperates with high-power gain optical path module to realize polarization-maintaining fiber output of single-wavelength high-power laser. The professionally designed drive and temperature control circuit control ensures the safe and stable operation of the laser, and the spectrum and power remain stable for a long time. The modular package has a ...

 The L-band high-power erbium-doped fiber amplifier is based on the principle of stimulated amplification of optical signals in erbium-doped fiber. It adopts efficient single-mode fiber optical amplification design and high-power laser heat dissipation technology to achieve high-power output of 1570~1605nm wavelength laser. It has the advantages of high power and low noise and can be used in fiber optic communication systems, fiber optic sensing, laser radar, etc. This is a L Band 37dBm erbium-doped fiber amplifier. High power EDFA has built-in cooling fan.  Here is a desktop type, customizable module fiber amplifier. The output can be adjusted on the screen . Use the up and down arrow buttons on the screen to adjust the power directly. You can also click 'PowerSet' or 'CurrenSet' and enter your desired power value. The amplifier can also be controlled by software. Click the 'Mode' area to switch the working mode. There are two modes to choose from: ACC and AP...