NakuLaser Blog

 This is 520nm high power green fiber laser system . This laser adds software control. Use RS232-USB to connect the laser and computer software.The laser output power can be adjusted by software. Using EasyHost software, you can also write your own programs to control the lower computer according to the communication protocol. The output power is 22W is a high-power laser, we added a heat sink under the laser module. The heat sink is composed of aluminum sheets and 3 cooling fans. Its fiber is pluggable, here we choose a 1000μm fiber. Let's check it now. Software Operation: Click 'Open COM', the software links the lower computer control circuit of the laser. When starting the software for the first time, set the maximum current first, and set a maximum current value according to the laser test report. If the current is too large, it is easy to burn out the laser chip. For each laser, the maximum current must be set first.

 This is our best selling laser module . Its pattern is composed of 81 grids and a center point. The laser focal length is adjustable, which is convenient for different working distances. The red module is shown in the video, and the green laser and blue laser can also be customized. Let's check it now.